BogjeDoen

Past, Present, and Future Projects

There have been several attempts to revive the Amiga hardware with modern technology. In addition to the AmigaNG hardware, several projects attempt(ed), with more or less success, to provide modern Amiga hardware:

Names Photos Comments Statuses
Amiga 550
  A clone of the A500 with a Zorro II slot, an IDE port, two clock ports, and ports for the MAS-MP3-Player and accelerator boards. Abandonned
Amy the Dream Clone   A clone of the A500 in on an ATX motherboard. Abandonned
DIY-A586   A FPGA-based system to build from components Preview
FPGA Arcade   A FPGA-based system that can mimic various computers, including the A1200 including the AGA chipsets. For sale
M5 Motherboard   Mini ITX motherboard with Spartan3 - XC3S400 for a virtual 68000 OCS/ECS. For sale
Minimig   A clone of the A500/A2000 or A1000 based on a FPGA. For sale
MiST   A FPGA-based system that can mimic various computers, including the A1200 including the AGA chipsets. For sale
MiSTer (in French)   A FPGA-based system, follow-up of MIST, with a more powerful FPGA on a Terasic DE10-Nano card. For sale
Natami   An Amiga-compatible hardware to run natively original Commodore Amiga software with up-to-date and efficient components. Abandonned

 

FPGA Arcade

Amedia Computer sells the FPGA Arcade in a ready-for-use configuration that includes an Antec Vesa 110 Mini ITX case with a SDHC-Card 8GB, an ATX adapter, and a proper backpanel. They can also include the Workbench 3.1 electronic licence as well as the original Kickstart 3.1 file. With this configuration, it is only a matter of plugging the board into a 15kHz monitor and playing!

 

Preparing the SD Card and the FPGA Arcade

A FPGA Arcade is built around a Replay 1 board (Reaply 2 on its way!). The Replay 1 board contains two main chips: an ARM and a 1.6M Gate Xilinx FPGA. The ARM actually starts first and takes care of setting up the FPGA using files on the SD card. Thus, updating a FPGA Arcade means updating the ARM firmware in flash memory and updating the core(s) stored in files on the SD card.

The SD card must be formatted using the FAT32 filesystem. Then, it should contain a replay.ini file and a loader that will be read/run by the FPGA Arcade when booting. (Although it is possible to start directly into the Amiga, see later).

The loader is available on the FPGA Arcade Web site. There are several posts with various versions and the latest is hard to find but seems to be in /releases/cores/R1/loader/. Download the file loader_R1_20190804_1545_c77fc26.zip and unarchive it at the root of the SD Card. Now, it is time to find the latest firmware, which seems to be in https://github.com/FPGAArcade/replay_release/tree/master/firmware/replay1. Download the file Firmware_Replay1_20190928_00-01.zip and unarchive it in its own folder on the SD Card.

Now, put the SD Card into the FPGA Arcade and switch it on. The loader will start and show a control menu (OSD) over a nice background image. From this menu, select a target, which will be one of the INI file available in the folder rAppUpdater of the firmware. Choose the INI file depending on your system (PAL vs. NTSC, 30 vs. 60 fps). After following the instruction (don't loose electrical power during the update!), the latest firmware is now running your FGPA Arcade .

 

Choosing, Installing, and Setting the Amiga Cores

The Amiga cores seem to be only availble in https://github.com/FPGAArcade/replay_release/tree/master/amiga although other cores are available in https://build.fpgaarcade.com/releases/cores/R1/. At the moment, there are three Amiga cores available:

Choose the Amiga AGA core, download it, and install it in its own folder on the SD Card. Modify the replay.ini to match your setup (TV model, etc.)

I have a RCA 50" 4K Roku Smart TV model RTRU5028. I had to make several tests to find the best setttings to run my Amiga, both Workbench and games, on this TV.


The last three changes:

Tygre - 2019-11-01 05:47:29 pm  |  Tygre - 2019-10-27 06:26:42 pm  |  Tygre - 2019-10-27 06:20:19 pm